AUTO/MARINE STRUCTURAL
STRUCTURAL
ACRYLIC BONDER
HANDLING STRENGTH
7 - 10 MINUTES
For structural strength bonding of metals, including aluminium, stainless steel,
mild-steel, most plastics, composite materials, ceramics, FRP's, GPR's, ferrites, fibreglass, wood, marble, and glass.
Industries served: vehicle/body building, marine, industrial, automotive, aerospace, etc.
For directions see technical data sheets
Sizes: 400mle
AUTO/MARINE STRUCTURAL
STRUCTURAL
METHACRYLATE BONDER
HANDLING STRENGTH
7 - 10 minutes
For structural strength bonding of metals, including aluminium, stainless
steel, mild-steel, most plastics, composite materials, ceramics, FRP's,
GRP's, ferrites, fibreglass, wood, marble and glass.
Industries served: vehicle/body building, marine, industrial, automotive,
aerospace, etc.
For directions see technical data sheets.
Sizes: 50mle
AUTO/MARINE STRUCTURAL
STRUCTURAL
ACRYLIC BONDER
HANDLING STRENGTH
20 - 25 MINUTES
For structural strength bonding of metals, including aluminium,
stainless steel, mild-steel, most plastics, composite materials,
ceramics, FRF's, GRP's, ferrites, fibreglass, wood, marble, and glass.
Industries served: vehicle/body building, marine, industrial,
automotive, aerospace, etc.
For directions see technical data sheets
Sizes: 400mle
AUTO/MARINE STRUCTURAL
STRUCTURAL
METHACRYLATE BOND
HANDLING STRENGTH
20 - 25 MINUTES
For structural strength bonding of metals, including aluminium, stainless
steel, mild-steel, most plastics, composite materials, ceramics, FRP's,
GRP's, ferrites, fibreglass, wood, marble and glass.
Industries served: vehicle/body building, marine, industrial, automotive,
areospace, etc.
For directions see technical data sheets.
Sizes: 50mle
FOR RUBBER & PLASTIC MATERIALS
Bonds rubbers and plastics, and many other materials
Directions: Clean and dry surfaces
to be bonded. Apply adhesive sparingly to one surface and assemble parts. Hold or clamp parts together for 60 second. Leave for 1 hour to fully cure. Activators and primers can be used to aid bonding.
Sizes: 20ge
CYANOACRYLATE ADHESIVE
FOR METALS & POROUS MATERIALS
Bonds Ferrous and Non Ferrous metals, plastics including UPVC, wood
and many other materials.
Directions: Clean and dry surfaces to be bonded. Apply adhesive sparingly to
one surface and assemble parts. Hold or clamp parts together for 60 seconds.
Leave for 1 hour to fully cure. Activators and primers can be used to aid bonding.
Sizes: 20ge
SPRAY ADHESIVE 400ml
- QUICK TACK
- DIRECTIONAL
- NON STAINING
SPRAY ADHESIVE
SPECIAL NOTE
For: Foam, Carpet, Plastic, Rubber etc.
DIRECTIONS:
Shake well before use.
On porous surfaces bond immediately.
on non porous surfaces leave to tack for one minute.
Invert to clear nozzle.
SPRAY ADHESIVE
1950
Also comes in rapid-clear
All purpose bonder for most plastics.
Used in Automotive Marine & Industry
Method of use:
Insert cartridge into gun. Before connecting nozzle, express small amount of
Plasibond to confirm free-flowing product. Then attach nozzle and use required
amount of adhesive to area to be bonded. If necessary, support parts while
product is curing. Can be sanded, drilled, painted etc. (leave nozzle on cartridge
for storage. To use again, remove nozzle and repeat method of use with new nozzle).
Contents 50ml