Paints / Coatings

HI-FLEX STONECHIP COATING 400 ml

MULTI-PURPOSE
O E STRUCTURE
I.C./PVC FREE
FAST PAINTOVER
SANDABLE

HI-FLEX

Hi-flex is a highly flexible anti-corrosion protective coating which gives an O E structure finish.

Can be over painted very quickly
Can be built-up very quickly
Can be sanded when dry

Direction:

Shake can vigorously. Spray in short bursts onto desired area.

High bond strength to most surfaces
Isocyanate free
PVC free

HI COVER SATIN BLACK 500 ml

Matches factory finish
High capacity cover
Spray gun finish
Low over spray

Hi Cover Satin Black

Especially developed to match OEM finish on modern vehicles.

Can be used for external or internal satin black finish on metal or plastic.

Quick drying form use as guide coat.

Directions:

1. Shake can well before use.

2. Make sure surfaces to be painted are clean & grease free.

3. Bare metal should be printed.

4. Spray in light, even coats for best finish.

HI-ETCH FILLER PRIMER 520 e 3 400ml

FOR BARE METAL SURFACES - GREY-GREEN

FAST DRYING.
ANTI-CORROSIVE.
COST EFFICIENT.
INFRA RED COMPATIBLE.
CHROMATE FREE.

HI-ETCH FILLER PRIMER

HI-ETCH FILLER PRIMER is a fast drying self etch primer with active protecting against corrosion for the car and vehicle repair sector. Adhesive on iron, steel, zinc and aluminium. Welding tested in accordance to DVS 050. Professional spray for minor repairs, and for surfaces which have been partially abraded down to the bare metal.

USE: The substrate must be clean, free from corrosion, grease, oil or polishing agents. Zinc substrates. Do not overcoat with polyester materials. Shake can vigorously! Spray sample first distance 20-30 cm. Spray on several light coats in crisscross fashion. After use, turn can upside down and spray until the valve is empty.

ZINC WELD 400 ml

ANTI-CORROSION
BARE METAL PROTECTION
WELD THROUGH PRIMER

ZINC WELD

Formulated for EASE of USE.

Can be SPOT - MIG and CO2 welded.
Can be over painted with most types of paint.
Has strong anti-corrosive properties.

DIRECTION:

SHAKE CAN WELL BEFORE USE. INVERT CAN AFTER USE TO CLEAN VALVE.

FADE OUT 400ml

PROFESSIONAL USE ONLY

For blending dry edges on lacquer.

GLASS LIKE FINISH.
NO ISOCYANATES.
SAVES TIME.
ALWAYS READY TO USE.

FADE OUT

Special blend of thinner - lacquer for the blending of dry edges of lacquer overspray. Compatible with most makes of 1k & 2k lacquer.

DIRETIONS FOR USE

1. Shake well before use.

2. Spray in light even coats until desired effect obtained.

3. Invert can and spray a short burst to clean nozzle after us.

CAVITY WAX e 1L made in EC

"TRANSLUCENT"

HIGH TEMPERATURE RESISTANCE
DEEP PENETRATION
SPECIAL CORROSION INHIBITORS
NO SEEPAGE WHEN CURED
REPRODUCES O.E.M. FINISH
FAST DRYING

CAVITY WAX "TRANSLUCENT"

A superior quality injection wax to reproduce an O.E.M. finish for corrosion on motor vehicles. Can also be used as a protective coating in many other applications including marine and industry.

METHOD OF USE

Suface must be clean and dry before application.

Shake Can Well Use suitable application gun at 2 - 6 bar.

Application temperature 5 - 35° C.

Quick search - Paints & Coatings

HI 'CLEAR' GLOSS LACQUER 500ml

Glass-like finish
HVLP Spray pattern
UV Resistant
No isocyanates

Hi 'Clear' Gloss Lacquer

Clear 1k lacquer for use over painted surfaces. Dries to give a hard UV resistant finish. Compatible on most types of paint but test on unusual coatings.

DIRECTIONS:

1. Shake can well before use.

2. Make sure surface to sprayed is clean and grease free.

3. Spray in light, even coats for best finish.

4. Invert can and spray to clean nozzles after use.