D'SOLVE 1 litre For Professional Use Only
Professional Body Solvent for
Removal of
Silicone - Wax - Tar - Adhesive
Sealant - Undercoating - Grease - Polish
D'SOLVE
Professional Body Solvent for removal of contaminates found in bodyshops. D'Solve
has been developed to work longer by slowing the rate of evaporation.
D'Solve leaves surfaces clean & without residue
- Fast acting
- Slow evaporation
METHOD OF USE
Apply D'Solve to a clean dry cloth and gently soak area to be cleaned. When contaminates are removed, buff over with a dry soft cloth.
(Do not rub too hard on fresh paint) Check first for compatability on plastice.
DISSOLVES and REMOVES
.GLUE
.WAX
.SILICONE
.BUTYL
.TAR
.SEALANTS
Specially formulated to stay on vertical surfaces
D'BOND
SPECIAL NOTE "Strong Solvent"
Before using this product check for compatibility especially on fresh paint or 1k paint.
DIRECTIONS: Spray onto surface and leave for 1-2 minutes for quick removal of adhesives etc. For sidestripes or hazard logos remove plastic-vinyl with hot air gun the spray D'Bond onto remaining glue and rub with absorbent cloth.
SPECIAL SUPERFAST FORMULATION
For Cleaning
Engines - Transmission - Brakes - Carbs
Injection - Electronics - Pre Welding
and for any other degreasing job you care to name LEAVES PARTS CLEAN, DRY
Total Power Degreaser
Uses a very special formulation that cuts through grease and grime fast. Total Power
Degreaser has enough power to cut through grease with one BLAST ensuring excellent economy of use and Eco Efficiency. Once the parts have been cleaned you are left with a dry uncontaminated surface.
Total Power Degreaser is good for:
Engines - Gearboxes - Brakes - Carbs - Injection - Electronics
Pre-Weld cleaning - Upholstery grease marks
For any trade
Method of Use
For Degreasing metal parts spray in one good burst, repeat if necessary.
For non metal surfaces, check on unseen area first.
For Professional use only.
